PVC PP PE Corrugated Pipe Machine

Mochini oa lipeipi oa PVC PP PE ke mohala oa tlhahiso o ikemetseng o ikemetseng o tsoelang pele ho sebetsana le thepa e tala ea polasetiki ka har'a liphaephe tse entsoeng ka lerako le le leng ka lits'ebetso tse kang extrusion, ho bopa, ho pholisa, ho hula le ho itšeha.

 

 

Mokotla oa lisebelisoa tsa lipeipi tse entsoeng ka lerako le le leng ke ho sebelisa mochini oa modular le o tsamaeang ka masenke le hlobo e etselitsoeng ka ho khetheha ho hlakola le ho hatella phala ea polasetiki e pharalletseng e se nang letho letotong la meaho e fapanyetsanang ea tlhoro le ea phula. Sebopeho sena se fana ka boima bo phahameng haholo ba selikalikoe le ts'ebetso e hatellang ka tšebeliso e fokolang ea thepa.

 

 

Mohala o tloaelehileng oa tlhahiso ea lipeipi tsa lebota le le leng hangata o kenyelletsa likarolo tse latelang tsa bohlokoa:

1. Extruder

Mosebetsi: Ho chesa, ho qhibiliha, ho etsa polasetiki, le ho ntša PVC, PP, kapa likaroloana tsa polasetiki tsa PE (kapa phofo).

·Litšobotsi:

·Khetha bophara ba sekoti se loketseng (joaloka Φ 65, Φ 90mm) le karolelano ea bolelele ho isa ho bophara (L/D) ho latela bophahamo ba tlhahiso le bophara ba phaephe.

·Moetso oa li-screw le libarele li ka fapana bakeng sa lisebelisoa tse fapaneng (PVC/PP/PE), joalo ka tekanyo ea compression le moralo oa ho kuta.

·Ho hlokahala mokhoa o nepahetseng oa ho laola mocheso.

 

2. Ho bopa hlooho ea lefu

·Mosebetsi: Ena ke e 'ngoe ea litheknoloji tsa mantlha. Ke hlobo e khethehileng ea crosshead e etsang sebōpeho sa phaephe e se nang letho.

·Sebopeho: se kenyeletsang:

· Arola shuttle: ajoa ka ho lekana ho qhibiliha hore e be sebopeho sa selikalikoe.

·Core rod: e etsa bophara bo ka hare ba phala.

•Molomo oa hlobo: o etsa bophara bo ka ntle ba phala.

·Vacuum masoba le likanale tsa khatello: tse sebelisetsoang ho bopa maqhubu a mojulung oa ho etsa.

 

3. Mochine oa ho etsa Ripple

·Mosebetsi: Karolo ea mantlha ea mohala oa tlhahiso, e nang le lipara tse ngata (hangata lipara tse 60-200) tsa li-module tse arotsoeng ka lihalofo tse ka holimo le tse tlase, tse kentsoeng liketane tse peli tse potolohang tse lumellanang.

· Mokhoa oa ho sebetsa:

1. Mojule o koetsoe nko, o etsa sekoti se feletseng se nang le sebopeho sa corrugated ka hare.

2. Mojule o pota-potile-thempereichara e phahameng e ntšitsoeng hloohong ea mochini ebe e tsamaea 'moho.

3. Ka likoti tse nyenyane tsa mojule, vacuum e huloa ka ntle ho khomarela ka thata tube e se nang letho ho sekoti se pholileng sa mojule, ka potlako ho e bōpa hore e be sebopeho sa masenke.

4. Ka mor'a hore mojule o fihle qetellong, o bule, o o tlose ho tloha ka har'a tube e entsoeng ka masenke, 'me u e khutlisetse sebakeng sa hlooho ea mochine.

·Mojule: E entsoe ka-ka tšepe ea boleng bo holimo e nang le litlhoko tse nepahetseng haholo, sebaka sa eona se laola sebopeho sa maqhubu a sekoti (joalo ka sebopeho le boholo ba litlhoro le liphula).

 

4. Sistimi e phodileng

·Mosebetsi: Folisa mojule oa ho bopa, tlosa mocheso ho tsoa polasetiking e qhibilihisitsoeng, 'me u e bōpe kapele.

·Mokhoa: Hangata, pipe ea metsi ea spray e kenngoa ka har'a mochine oa ho bopa ho fafatsa metsi a pholileng ka ho toba holim'a mojulu.

 

5. Mochine oa ho hula

·Mosebetsi: Fana ka ho hula ka boreleli, ho hokahanya le mochini oa extruder le oa ho etsa, 'me u tsoele pele ho ntša phala e phethiloeng ka masenke mochining oa ho etsa.

·Mofuta: Terekere ea mofuta oa Crawler e sebelisoa hangata, e nang le sebaka se seholo sa ho koala, seo ho seng bonolo ho thella kapa ho batalatsa phala.

 

6. Mochine oa ho hula

·Mosebetsi: Fana ka ho hula ka boreleli, ho hokahanya le mochini oa extruder le oa ho etsa, 'me u tsoele pele ho ntša phala e phethiloeng ka masenke mochining oa ho etsa.

·Mofuta: Terekere ea mofuta oa Crawler e sebelisoa hangata, e nang le sebaka se seholo sa ho koala, seo ho seng bonolo ho thella kapa ho batalatsa phala.

 

7. Mochini oa ho itšeha

·Mosebetsi o tla tsoela pele ho khaola phala ka bolelele bo behiloeng.

·Mofuta:

·Mochini oa ho itšeha ka lipolanete: o sebelisoang haholo. Lehare la ho itšeha le potoloha ka bophara le lisebelisoa tsa liphaephe ho fihlela{1}}seha ka lebelo le holimo le ho seha hamonate.

·Mochini oa ho seha oa mofuta oa Lift: o sebelisoa bakeng sa litekanyo tse nyane kapa{0}}mehala ea tlhahiso e tlase haholo.

 

8. Tsamaiso e thusang

·Vacuum system: ho fana ka mohloli o tsitsitseng oa vacuum bakeng sa mojule oa ho bopa ke senotlolo sa ho bopa.

·Moea o hatelitsoeng: ka linako tse ling o sebelisoa bakeng sa sebopeho sa khatello ea kahare (e thusang vacuum) le ho khanna likarolo tsa moea.

·Sistimi ea taolo: E Thehiloe ho PLC (Programmable Logic Controller) le skrine ea ho ama, e kopanya le ho laola lebelo, mocheso, tekanyo ea vacuum, bolelele ba ho itšeha le likarolo tse ling tsa mohala oohle oa tlhahiso.

·Sistimi ea ho fepa: Tsamaisa thepa e tala ka bo eona ho tloha ka moqomong oa polokelo ho ea ho extruder hopper.

·Sesebelisoa sa khatiso: Litlhaloso tsa khatiso, mefuta, matsatsi, le lintlha tse ling tse holim'a phala.

 

 

1. Ho fepa le ho etsa polasetiki: Lisebelisoa tse tala li kena ka har'a extruder ka mokhoa oa ho fepa, 'me li futhumatsoa, ​​li kuta, ebe li qhibiliha hore e be seaparo sa seaparo.

2. Extrusion tube blank: The melt e fetisetsoa ka har'a tšupu e boreleli e tšesaane{1}e se nang letho ka hloohong.

3. Vacuum forming: Theko e phahameng-e koaletsoeng ka tšupu ea mocheso e phuthetsoe hang-hang ke mojule o koetsoeng, ebe vacuum e ka ntle e kenngoa ho etsa hore e khomarele ka thata lekhalo le nang le masenke a mojule, ho etsa sebopeho sa masenke le ho bata ka potlako le ho bōptjoa.

4. Ho hula: Thepa e entsoeng ka masenke e ntšoa ka lebelo le sa khaotseng ke mochini oa ho hula.

5. Ho khaola: Mochini oa ho itšeha o itšeha ka bohona ho latela bolelele bo behiloeng.

6. Tlhahlobo ea liphutheloana: Liphaephe tse felileng lia hlahlojoa (tse kang boholo le ponahalo) ebe lia phutheloa.

 

 

Le hoja melao-motheo ea lisebelisoa e tšoana, ho na le liphapang tsa bohlokoa ha ho etsoa lisebelisoa tse fapaneng:

Litšobotsi tsa lisebelisoa tsa lipeipi tsa masenke tsa PVC

Karo-karolelano ea khatello ea screw ea extruder e batla e le nyane (~2.5-2.8:1), 'me ho hlokahala taolo e ntle ea mocheso ho thibela ho bola. The hangata e sebelisoang conical twin-screw extruder bakeng sa PVC e na le tlhahiso e kholo le polasetiki e ntle.

Moralo oa mocha oa phallo bakeng sa hlobo ea hlooho ea mochini o lokela ho qoba likhutlo tse shoeleng phallong ea thepa le ho thibela PVC ho thella le ho bola.

Thempereichara ea ho bopa e na le mocheso o moqotetsane oa ho sebetsa 'me o na le maikutlo a mocheso, o hlokang taolo e nepahetseng. (~170-185 likhato)

Litlhoko tsa ho futhumatsa: PVC e na le conductivity e fokolang ea mocheso 'me e hloka hore ho be le pholile e sebetsang hore e bōpehe.

 

PP/PE lisebelisoa tsa lipeipi tsa masenke

Karo-karolelano ea compression ea screw extruder e batla e phahame (~ 3.0-3.5: 1), e hlokang ho kuta ka matla le ho kopanya bokhoni. Ka kakaretso, ho sebelisoa screw extruder e le 'ngoe.

Hlooho ea hlooho: e sa utloeleng likhutlong tse shoeleng ho feta PVC, empa moralo oa mocha oa phallo o ntse o hloka ho ba boreleli.

Mocheso oa ho bōpa: Mocheso oa ho sebetsa o phahame 'me mefuta e mengata e pharaletseng. (PP: ~ 200-230℃, PE: ~ 180-210 degree)

Litlhoko tsa ho futhumatsa: lisebelisoa tsa kristale tsa PP/PE, sekhahla sa ho pholisa le khanya ea kristale e ama ts'ebetso, ka litlhoko tse phahameng tsa ho pholisa.

Phofo e sebelisoang hangata sebakeng se tala (PVC resin powder) e sebetsoa ka kotloloho. Hangata li-pellets tsa polasetiki li sebelisoa.

Tlhokomeliso: Hangata mohala oa tlhahiso ha o khone ho sebelisa lisebelisoa tsohle ka ho fapanyetsana. Ha u reka lisebelisoa, hoa hlokahala ho hlakisa hore na ke lisebelisoa life tsa liphaephe tse hlahisoang haholo-holo, 'me moetsi oa thepa o tla etsa moralo ho latela litšobotsi tsa thepa.

 

 

1. Sehlahisoa se reriloeng:

· Bophahamo ba phala: Thepa e na le sebaka se hlakileng sa ho sebetsa (joalo ka DN50-DN200mm).

·Maemo a ho satalla ha selikalikoe, joalo ka SN4, SN8, le SN16, a khetholla sebopeho sa hlobo le khetho ea thepa bakeng sa corrugation.

2. Tlhokahalo ea bokhoni: Etsa qeto ea boholo ba extruder le palo ea ho etsa li-module.

3. Boemo ba boiketsetso: Mohala oa tlhahiso o ikemetseng o kenyelletsa ho fepa ka boiketsetso, ho bekha ka marang-rang, ho paka ka mokhoa o itekanetseng, joalo-joalo, ka matsete a phahameng le katleho.

Kakaretso: Thepa e le 'ngoe ea liphaephe tse entsoeng ka lerako ke lisebelisoa tse matla tsa theknoloji tse hōlileng tsebong,' me theknoloji ea eona ea bohlokoa e le ka har'a mochine o nepahetseng oa ho etsa mochine le tsamaiso ea taolo e tiisang botsitso ba synchronous ea extrusion, ho theha le ho hula. Ha u khetha lisebelisoa, ho bohlokoa ho tsamaisana le mofuta o nepahetseng ka ho fetesisa ho latela mofuta oa hau oa thepa, litlhaloso tsa sehlahisoa le sepheo sa bokhoni ba tlhahiso.

 

 

Mochini ona o sebelisetsoa ho hlahisa peipi ea masenke ea PVC PP PE .E na le extruder ,mold ,forming machine , huul{1} off and winder. E sebelisoa haholo bophelong ba rona, E ka sebelisoa joalo ka phaephe ea khoele, phala ea drain, phala ea Shisha, phala e ntseng e honyela joalo-joalo. Liphaephe tse nang le lerako le le leng, tse nkang melemo ea ho hanyetsa mocheso o phahameng, ho hanyetsa abrasion, ho hanyetsa kutu, matla a phahameng.

 

Mohlala	Pipe Diameter	Lebelo la Tlhahiso	Mohlala oa Extruder	Matla a Motlakase	Mold Block Qty.
HG-14	5-14 limilimithara	6-8m/min	SJ45/28	7.5kw	42 lipara
HG-32	10-32 limilimithara	5-12m/min	SJ50/30	15kw	50 lipara
HG-50	16-50 limilimithara	4-10m/min	SJ65/30	22kw	50 lipara
HG-63	16-63 limilimithara	4-10m/min	SJ65/30	30kw	50 lipara
HG-110	32-110 limilimithara	2-8m/min	SJ65/33	37kw	72 lipara
HG-160	50-160 limilimithara	2-5m/min	SJ75/30	45kw	72 lipara
HG-50 lebelo le phahameng	9-50 limilimithara	20-35m/min	SJ65/30	30kw	90 para

 

Hot Tags: mochini oa lipeipi oa pvc pp, China pvc pp bahlahisi ba mochini oa lipeipi tse entsoeng ka masenke, barekisi, feme